Posts

water-heater-plumber

Many homeowners can feel overwhelmed by the decision to repair their water heater or to just replace it altogether. Before you make the decision to replace your unit, hire a trustworthy plumber that knows what they’re looking at. They may be able to efficiently repair your water heater saving you a lot of time, money and hassle. Here are some of the tips we use to help our client decide on water heater repair or replacement.

Know The Age of Your Water Heater

Most water heaters last between 10 and 15 years. If you’re experiencing consistent problems with your water heater, it may be time to consider replacing rather than repairing. Water heater efficiency and cost is important. Continuing to put money into repairs on an old water heater is not the most beneficial option when considering your time and money.

Access the Frequency of Repairs in the Past

If you’re making yearly repairs on your water heater, it may be time to consider investing in a new one. However, if you’re experiencing an issue for the first time, you may benefit more from a simple repair. Keep in mind the cumulative cost of constant repairs versus a one time investment of a new water heater.

frozen pipes plumber

Evaluate the Severity of Your Water Heater Issues

Evaluating how serious your water heater problems are is vital in making that final decision in repairing or replacing. Call a professional from Moonlight Plumbing to come in and evaluate your water heater problems. We will give you an accurate estimate on the cost of your water heater repair. We can help you decide whether it’s a smart idea to replace or repair.

Consider the Cost of Your Current Water Heater Bill

Another benefit of talking to a Moonlight Plumbing professional is getting a general idea of your monthly water heater cost. If your monthly bill is too high or you’re experiencing frequent loss of hot water, we can help you analyze your cost to benefit ratio to determine your smartest option.

Compare the Quality and Cost of Technicians in Your Area

If you’ve hired plumbers in the past for water heater repairs but continue experiencing low quality performance, it may be time to get a second opinion. If water heater issues are occurring because of misdiagnosis, you shouldn’t jump right into purchasing a replacement. First, get a trusted second opinion and an accurate assessment from a professional at Moonlight Plumbing.

If you want a second opinion on replacing your water heater, contact us today for 10% off your first service! You can count on our team of experts to deliver trustworthy service 24 hours a day, 7 days a week.

Commercial plumbing

Are you one of the thousands of businesses that shut down their physical location because of the COVID-19 pandemic? If so, we know that opening back up is essential but will take time and careful planning. The commercial plumber at Moonlight Plumbing wants to share a few things to look out for if your business has been stagnant for a while. These precautions will help keep your customers and employees safe when you reopen in this new normal. 

Commercial Plumbing Tips

Flush Out Standing Water

This tip is especially important for business where employees and customers use and consume water. As water rests inside pipes and appliances, it loses chlorination allowing harmful organisms to grow such as tuberculous mycobacteria and Legionella. These bacteria are harmful to the pipes, make water non consumable and should not be used for cleaning or cooking. We recommend both cold and hot water lines be flushed before you reopen to make sure only fresh, potable water is running through the pipes. We aren’t just talking about sinks. You need to think about showers, hot tubs, decorative fountains, cooling towers and any other water fixtures inside your business. 

Water Heater Inspection

Water heater temperatures need to be at 140° F to kill pathogens. They also need a mixing valve to bring the temperature down to 120° F. As water flows through the sink, tub faucets and shower heads, the mixing value ensures the water does not scold you. If the water heater has not been operational for some time, you may want to call an experienced commercial plumber to inspect the fixture to ensure it functions properly for everyone’s safety. 

Test Your Toilets

Even though you don’t consume, cook or clean with toilet water, you should not overlook the operation of your toilet before you reopen your business. One way to make sure your toilets are functioning is to check if they are flushing properly and not leaking. To test this, drop some food coloring into the toilet tank. Wait 15 minutes and check the toilet bowl for any color. If you don’t see any color, it’s a sign you may have a leak and will want to call a commercial plumber before opening. 

  • commercial plumber expert
  • commercial plumbing reopen
  • commercial contracting

Call A Commercial Plumber Before You Reopen

You can read more from the CDC about what steps you should take to reopen your business on their site. In the meantime, we, Moonlight Plumbing of Stonington and Mystic, CT, are here to help you reopen your business as quickly and safely as possible without any plumbing issues. Our commercial plumbing services can handle all of your plumbing needs big or small. Check out our services and contact us today for 10% off your first service. Let us help get you back to business!

frozen pipes plumbing

It’s getting to be that time of the year, again, where you have to put on a few extra layers before walking outside. For many in the North, the snowfall has already begun. With the snowfall comes freezing temperatures, with freezing temperatures comes plumbing issues if not properly cared for/prepped! Our plumbers at Moonlight Plumbing, a top plumber in Connecticut, want to help ensure your family’s plumbing is prepared for what this winter may bring.

Before Winter Plumbing Prep

Install Insulation in Your Pipes

If water in your plumbing freezes, it will expand causing the pipe to burst. That’s why it’s so important to insulate and, in general, prep pipes for freezing temperatures. The best option is to purchase specifically designed pipe insulation. It’s especially important for areas of your home that are unheated like an attic, garage or basement. If you need an urgent, temporary solution, you can always use duct tape and newspaper for a quick insulation fix.

Seal Any and All Cracks

You’ll want to be sure you check your home for cracks and openings to stop drafts from freezing water systems. Specific areas to check include window and door frames, cable holes, sill plates, interior and exterior walls, etc. These fixes will improve your home insulation, in general, for the brutal winter nights.

Apply Electrical Heating Tape to Pipers

This is an option for easily-accessible pipes. This tape can be applied directly to any pipe to help retain heat. Note there are two different kinds of heating tape that can be used; self-monitoring and manual. Self-monitoring has a sensor that will automatically turn on and off when it senses the pipe needs more or less heat. Manual requires you to plug it in when the pipes may need more heat.

*DANGER: Follow manufacturer’s instructions and safety procedures when using and applying electrical heating tape.

Seal Crawl Spaces

If you live in an area where the winters are quite brutal, you want to be sure to cover crawl spaces with foam pieces cut to the dimensions of the vents. Secure foam with duct tape to ensure best insulation.

During Winter Tips/Tricks

Open Cabinets Regularly

While this may sound like an odd suggestion, any warm air circulating around pipes will better help to retain heat within the pipes. Be sure to remove any harmful chemicals from the cabinet if accessible to small children or pets!

Keep the Garage Door(s) Closed

Obviously, this is really important if you have water lines that run through your garage. Even one night of letting the cold air rush in because of leaving it open can be enough to burst and ruin your pipes.

Keep Thermostat Consistent

It’s important to keep steady temperatures around the home as it will help prevent ice blockages. It may be tempting to lower the thermostat at night to save on the heating bill, but this puts your pipes at risk. Take our word for it, a burst pipe is much more expensive than a slightly larger heating bill!

Open Interior Doors to Keep Your Home at a Consistent Temperature

This goes hand in hand with the point above. A steady flow of a consistent temperature will only improve and ensure pipes stay warm.

Set Heat to at Least 55˚F When You’re Not Home

This message mostly goes out to the “snow birds.” While it’s easy to just think you can turn everything off to save on utilities while you’re gone for the next few months, that’s just not the case. Be sure to keep your thermostat set to 55˚F or above to help prevent a piping disaster.

Let the Faucets Drip

Last tip/recommendation is to let the faucets drip. This doesn’t mean to turn on all the faucets in your house for every winter night. But, when particularly bitter weather is headed your way, determine which faucets are fed by “exposed” pipes and keep a drip of water running throughout the bad weather. Since running water carries more internal energy, it will create a warmer pipe versus stagnant water.

christmas christmas house cold fir

Frozen Pipes? The Top Plumber in Connecticut Can Help!

If you happen to run into an unfortunate frozen or burst pipe issue, be sure to contact a professional IMMEDIATELY! Our Moonlight plumbers are available to assist with any plumbing emergencies anytime (24/7). Call the top plumber in Connecticut, Moonlight Plumbing, or email our team for more information/assistance. Stay safe and be prepared for the coming winter months!

commercial plumber

For your safety and the safety of your home, our bathroom plumber typically recommends leaving the plumbing to the plumbers. However, a clogged toilet is a frustrating plumbing issue that you may be able to solve on your own, without a plunger. 

For many, plungers are a side-of-the-toilet bathroom staple and the easy go-to for an unforgiving clog. However, plungers are oftentimes used with excessive force creating an even bigger mess. When used improperly, a plunger may break the seal between the floor and the toilet or even crack the bowl.

Check out these 5 home remedies to clear a clogged toilet without a plumber.

*A friendly reminder from your neighborhood bathroom plumber, always wear protective gloves when working with your plumbing.

Hot Water

An easy, yet effective, declogging method is to pour hot water into the toilet bowl. The hot water may loosen the clog just enough to get things moving. When trying this method, make sure your water is hot, not boiling. Boiling water may crack your toilet creating a much larger problem. 

Dish Soap

Hot water not doing the trick? Trying adding one cup of dish soap into the bowl. You’ll want to let the mixture sit for 30 minutes before flushing. If you have the time, consider letting the soap and water sit overnight. If you are all out of dish soap, shampoo could be used in its place.

Drain Clearing Chemicals

Although using chemicals is not an eco-friendly method, they do work. Follow the instructions closely on a product such as Drano. If you are dealing with a particularly pesky clog, do not use drain chemicals over and over again. They can cause the pipes to burn with overuse.

Drain Snake

Invest in a drain snake. On this particular one, a vinyl guard protects the porcelain at the throat of the toilet bowl. Follow the instructions closely for maximum effectiveness. Some people are tempted to unravel a wire hanger as a homemade drain snake. If the clog is very deep, this method will not work because the wire will not bend. Also, if used without care, the wire could damage the throat of the toilet.   

Baking Soda and Vinegar:

This classic cleaning mixture can also be used to clear a toilet. To use this method, you’ll need the toilet bowl about half way full of water. Add one cup of baking soda into the water, mix it around and let it sink. Next, add two cups of vinegar in a circular motion into the toilet and let it fizz. Wait about 30 minutes and try to flush. If it does not work the first time, add the same mixture into the toilet and let it sit overnight.

moonlight plumbing bathroom toilet

Even with top of the line plumbing, clogs will happen. Fortunately, there are a few plunger alternatives that are known to get rid of the grease and grime jamming up your toilet. If these tips and tricks don’t work, it may be time to call a local bathroom plumber. If you are located in the Mystic or Stonington, CT area, contact us for a free quote!

plumbing pipes new home construction

When building a house or commercial building “from scratch”, there’s a lot of moving parts. There are things and people to manage, numerous decisions to make, a budget to keep in mind, and a whole lot more. Honestly, it can be quite overwhelming. But, the plumbing aspect doesn’t have to be a headache. If you choose a professional plumber, he/she/they should have a thorough understanding of the complexity and amount of work that all new construction plumbing entails.

When you buy an older house/property instead of building, you often run into the issue of outdated and/or unmaintained plumbing. While it may feel like a burden upfront for all new plumbing appliances, the longevity and opportunity to properly care for new appliances can save significant amounts of money in the long run. Also, there are constant updates and improvements needed on plumbing appliances to help them run more efficiently. Installing these more efficient appliances upfront will help you save money on the utility bill each month.

We, at Moonlight Plumbing, understand you have a lot to worry about and we are prepared to help give you comfort knowing your new construction plumbing work is in good hands. Here are two new construction plumbing tips for your property.

new home construction plumbing

New Construction Plumbing Tips

  1. Understand Basic Plumbing Systems/Processes
    • Septic Tank/Sewer
      • You need to know what size of septic tank you need (dependent on the square footage and # of rooms in the house).
      • Septic tanks separate solid and liquid waste. The breakdown is completed by microorganisms and it outputs gas that needs to be vented properly.
    • Piping
      • Clean water flows through pipes at 50-60 psi from a supply line. Gravity pulls down the heavier, dirty water that will then exit the pipe system. Air also blows through the vents to help keep pipes clean and flowing smoothly.
    • Plumbing Appliances/Hardware
      • We all are familiar with plumbing hardware like tubs, sinks, showers, toilets, etc. It’s important to know that these appliances are easier to install if the walls and doorways haven’t been built out. Forgetting to do this prior to building will cause quite a headache and a lot of backtracking as far as building goes. If you’re worried about the cleanliness of the appliances, cover them with plastic or cardboard to help keep clean during construction.
  2. Important Plumbing Decisions to Keep in Mind When Building
    • Where will the main stack be located?
      • Generally, 3-4 inches in diameter and runs from the basement to the roof. Needs to be able to run without interruptions.
    • Install Drains and Vents
      • Bends in pipes need to be smooth when connecting to the main stack, pipes need to slant at a ¼” per foot to keep drain running properly, and venting needs to be set up properly so water and air can run through accordingly.
    • Be sure before any plumbing is installed you get a building permit to install your plumbing (this includes a plumbing diagram to be drawn up for approval).

Do you need a new construction plumber? 

With new construction plumbing projects, it’s important to find and hire a reputable plumbing contractor you can trust. Moonlight Plumbing has a team of experienced plumbers who have a diverse and expert understanding of new construction plumbing. We understand there’s always a budget to stick to and deadlines to meet whether building a residential or commercial building, and we are prepared to meet these expectations. We hope you choose one of our professionals to help with your next project! In the meantime, we are prepared to answer any questions you may have. Call one of our team members any time. If you are ready to receive a quote contact us today!

water heater plumber

Nearly 20% of your energy bill is calculated from your water heater. Our water heater plumber says that setting your water heater temperature too high/too low can do more harm than good. For example, if your water heater temperature is too high, you’re paying for that extra cost. On the contrary, if your water heater is too low you may experience an inconvenience with lack of hot water. Also, with lower water temperatures, you’re at greater risk for growing bacteria in your tank.

The EPA recommends a temperature of 120˚F for a water heater. It typically avoids insufficient hot water supply, is energy-efficient for billing purposes, and is a comfortable temperature for family members of all ages. But, there are a few reasons why you may want to set your heater above or below the recommended amount.

Reasons For Straying From the Recommended Temperature Setting

  • If you have a dishwasher that doesn’t preheat water, you may want to set the water heater to 140˚F.
  • If children or Elderly are in the facility, you may want to keep it lower due to burning concerns.
  • Individuals with suppressed immune systems or respiratory disease should keep the hot water at 140˚F.
  • Individuals living alone may want to keep it lower to try to save money since demand for water is less.
  • In general, every 10˚F you turn it down, you can save an average of 3-5% on your energy bill.

Other Notes About Water Temperature Setting

  • Need to know what your current water temperature setting is set to? It can be found by looking at the dial on the water heater. Or, if you don’t have a dial, you can take a temperature reading from any faucet. If you do a measurement from the faucet, be sure to let the water run for a few minutes to get the most accurate reading.
  • If you’re unsure on the temperature your water heater should be set, start at 120˚F change by intervals of 5-10˚F. You know you found the perfect temperature when…
    • You get enough hot water to shower, wash dishes, do laundry, etc without running out.
    • Children or other family members are not at risk of injury/burns.
    • It’s comfortable to cleanse with but is still at a respectable temperature to be wary of the energy bill.
  • If you decide you need to lower your water heater temperature, but are worried about bacteria growth, you could install a hot water tank booster. This will store the water at 140˚F, but will mix with cooler water before reaching the faucet. Thus, you get water about 120˚F by the time it is pouring into your hands and you can rest assured that bacteria isn’t infecting your water heater.

Water Heater Plumber Near You

Find a water heater plumber near you. In our previous blog we shared the different types of water heaters we offer at Moonlight Plumbing. Talk with one of our professionals today to see which water heater is best suited for your home/facility. Also discuss what temperature to which your water heater should be set. Anyway we can help, we’re here for you!

moonlight plumbing

If you’re going to be away from the house for a few days, a week, or even longer you’ll want to do a few things to your plumbing before you leave. Our plumbers at Moonlight Plumbing wanted to share a few, simple plumbing obligations that can help save money. It can even, potentially, save you from water mess caused by a leaky or broken pipe while you’re away.

Imagine it, you leave the house to go see family for a week. The best “vacation” we can get during quarantine. You really enjoy catching up with everyone and getting out of the house. You’re feeling relaxed for maybe the first time in a while. But, when you return home there’s a puddle of water on the kitchen floor. Your head starts spinning on where to start to clean up the mess. Before you arrive at a solution, you’re panicked at what broke and how much is it going to cost to fix it? Well, we want to provide you and your family with a helpful plumbing checklist to potentially avoid messes like this. You can use our list below to help check your plumbing is all set before you leave the house.

moonlight plumbing

Moonlight Plumbing Before You Leave Checklist

Turn off the main water supply

  • No one is going to be home and using the water, so no one will be missing it. Save yourself the potential headache from a water pipe breaking and leaking while you’re not home!

Clean the garbage disposal

  • Probably one of the smelliest places in our house. Ensuring your disposal doesn’t have food sitting in it while you’re away will help minimize the smell. You should run a disposal frequently anyway, but especially do it right before you leave for a period of time.

Clean the toilets

  • Another smelly spot in our homes. Flushing the toilets frequently helps to eliminate/minimize odors. But, if no one flushes it for a week it can get quite the odor if not appropriately cleaned before leaving. 

Check the sump pump

  • If there is a major flood in your basement due to a broken pipe, heavy rainfall, etc. you want to ensure your sump pump is going to help get the water out. You can test your pump by pouring a bucket of water into it and waiting for it to kick on. If it does, you’re all set. If not, give us a call.

Inspect and turn off water heater

  • If you’re turning off your main water supply, you certainly don’t need hot water. If you have a tank-based water heater, you can simply turn off the valve. This will also help save money because the water will no longer continue to cycle to keep warm while you’re away. You can actually drain the water out of your system and inspect for leaks before leaving as well. To be sure you do these maintenance preparations correctly, contact one of our professionals.

Shut off automatic ice maker

  • This is one a lot of people don’t think about. Your ice maker will continue to run and cost you money even though no one is using the ice.

Ensure outdoor sprinklers work properly (if you have them)

  • If you have an automatic sprinkler system, check that it’s set to run at the correct times each day. Also, double check that it’s following the proper schedule. The last thing you need is dead grass from the sprinklers not running, or a flooded yard from them never shutting off!

Leave washer and dishwasher doors open

  • Final little piece of information is to keep the washer and dishwasher doors open. This will help prevent a musty/old food smell, as well as mold. While unpleasant if you forget this, just be sure to run them empty when you get home. Try using a cleaner when you run it to get the pipes clear again and help the smell go away.
moonlight plumbing

Returning Home

Remember, once you return home, to turn on the water heater, main water supply, sprinklers, ice maker, etc. You’ll want to flush the toilets and run the garbage disposal again. You’ll want to do this as soon as possible because regular flushing and rinsing helps prevent odors in these appliances. But, if you forget to do any of these things before leaving for vacation, and you find yourself in a messy situation – call our professionals at Moonlight Plumbing! Unfortunately, we’ve seen countless flooded rooms, broken/leaky pipes, and faulty appliances in general. But because of this, we know how to properly clean up and repair the mess the first time around. We’re here if you need us!

Remodeling bathrooms can be stressful and complicated which is why our plumbing contractors are here to help. Expert guidance doesn’t have to be pricey and intimidating, but rather an asset to you when remodeling your residential or commercial space. To help guide you a bit, our team of experts have provided some tips and trick below.

Remodeling Tips & Tricks from our Plumbing Contractors

  • Have a Plan Before You Start
    • As we stated above, working with experts doesn’t have to be difficult. Our professional plumbers at Moonlight Plumbing, are all about finding what works with your budget. In the end, working with an expert can potentially save you hundreds of dollars in repairs or redos. Planning not only helps you determine which experts to hire, but also helps set a budget and timeline for the project. Always a good idea to be prepared.
  • If You Need to Move Plumbing, We’re Here to Help
    • It is rarely recommended that one tries to move plumbing around without expert guidance. This can lead to much bigger issues if not done correctly. Our team of experts at Moonlight Plumbing consist of experienced plumbers who deliver high-quality work the first time around. Working in the commercial industry, we understand how important it is to meet deadlines and stay within approved budgets. That’s why we’re here to help.
  • Don’t Flush Your Money Down the Toilet – Instead Update it
    • Toilets are one of the biggest users of water in our bathrooms. With each flush you can save thousands of gallons of water each year using one of our toilet handles (both touchless and manual options to fit your budget). In the end, changing the toilet seat and handle instead of replacing the entire toilet can help save you money on your renovation and on your water bill.
  • Touchless  Faucets and Shower Heads Can Change the Room’s Aesthetic (And Your Water Bill)
    • Touchless faucets, as we discussed in our last blog, are at a higher demand than ever because of the pandemic. We, at Moonlight Plumbing, can help spruce up your commercial restroom with a touchless faucet. In residential properties, we have manual faucets that have the functionality to reduce water usage. To accompany a new faucet, you can add a new shower head in the mix too. The best part about our new technology is that it’s not only aesthetically pleasing, but also is beneficial for conserving water. Check out all touchless options and statistics here.
  • To Accompany Your New Touchless Technology, Add New Lighting Too
    • Whether you add new light fixtures, additional light fixtures, or a skylight this will help make the space more welcoming and comforting. If you have the capabilities, dimmers are always a nice touch.
  • Finally, Add a Pop of Color with Paint and Decor
    • Typically, bathrooms are not always the biggest spaces. A pop of color and the right decor can drastically change the room. For budget friendly options, check out second-hand stores or garage sales to find “fixer-upper” furniture/decor.

Conclusion

Ready for your next bathroom remodel/renovation? Be sure to do your research on the best product for your new look, keep in mind the benefits of splurging on that new technology in the long run, and if you have any troubles reach out to an expert. Questions or concerns regarding plumbing, water heater, or equipment replacement? Call our team or reach out for a quote today. Talk soon!