Posts

Sewer and Drain Tips :: Plumbing Basics

sewer-and-drain-plumbing

Sewer and Drain Cleaning

You’ve come to the right place, we can help! Whether you’re looking for guidance on a routine cleaning schedule, have a strange odor coming from your sewer drains, or a drain has started making weird noises, we have tips to help clean and unclog any pesky pipes.

Routine Cleaning

To avoid sewer or drainage problems in the first place, we strongly recommend cleaning your lines often with an enzyme cleaner. These cleaners are found at most hardware stores and serve many different purposes, but any high-grade cleaner will work.

Once you’ve purchased an enzyme cleaner, you’ll want to follow the cleaner’s instructions and dump it into your basement drain. If your basement drain is unavailable, find a large drain to dump it into. Enzyme cleaners work over time, so be sure to let it soak and have time to break down bacteria.

Make Sure You Have a Snake

If you’re already experiencing a clog, you will need to try something more than a cleaner. Any minor clog is typically fixed with a tool called a snake. They’re long, and easy to shove down a drain and pull out or move blockages. You want to avoid breaking the line. If you can’t get through a blockage – don’t force the snake, it’s probably a bigger clog than you think and it’s time to call a professional.

Homemade Cleaning Solution

To break down grease and grime, you can use baking soda mixed with vinegar as a solvent. You’ll want to use one part baking soda and one part vinegar for the mixture. When these two products are mixed together, they have a chemical reaction where it foams and breaks down any grease build up. We recommend this option for any sink drain issues, but can be an option for backed up drains anywhere in your home.

Flushing Your Pipes

This option is only viable if you are not dealing with a clog as it requires water to run through your system. All you need to do is mix a bit of the drain cleaner into the toilet water and flush. Note, drain cleaner is different from enzyme cleaner in that it uses chemicals to break down the bacteria. Therefore, you don’t want to use this on your pipes too often as it could cause wear and deterioration on your pipes. This will help the cleaner to run through and coat pipes to help avoid clogs.

*Again, do not try this option if a clog already exists.

Need a Plumbing Professional?

Any of these options are great to catch a clog in its early stages or prevent future clogs. Often, though, we catch them once the damage is already done and you’ll likely need an expert to assess the situation.

Call our team anytime to check out your sewer and drainage issues. You can reach out to us by emailing moonlightplumbingllc@gmail.com or calling (860) 863-8189. We look forward to helping you!

/by

What to Look For in a Commercial Plumber in Connecticut

residential plumber connecticut

Finding the right commercial plumber in Connecticut doesn’t need to feel like a difficult decision. Experience and expertise are some of the top qualities you want to look for in a commercial plumber, and that’s exactly what you’ll get with our team. This article breaks down the top four qualities that you’ll want to look for next time you’re in need of a commercial plumber in Connecticut.

A Reliable Commercial Plumber Should Have/Do the Following

  • Hire a Plumber with Expertise in Commercial Properties 
    • Hiring a commercial plumber can feel a bit more intimidating than hiring a residential plumber. Luckily, our experts at Moonlight Plumbing can do both! Our team of plumbers have served commercial industries like hospitals, firehouses, education centers, hotels and more. It’s important to feel a sense of confidence in the job that is getting done for your commercial property. 
  • Ensure Your Commercial Plumber has Experience
    • When you’re looking to hire a commercial plumber, you want a team that has years of experience under their belt. Be sure to take into consideration the specific type of experience the plumber you’re hiring has. Again, you don’t want to hire a team that only has experience with small scale properties if you’re hiring for a commercial property. 
  • Hire a Trustworthy Commercial Plumber
    • One of the most important things to keep in mind about commercial plumbers are ensuring that you can trust them. You want the plumbers to accurately present the scope of work and get the job done right the first time. You don’t want the plumbers to misquote you on a project or leave you with a poor quality job. Our commercial plumbers take pride in building trust with our clients and you can always count on Moonlight Plumbing to be Connecticut’s most trustworthy team of plumbing professionals.
  • Make Sure your Commercial Plumber is Dependable
    • You depend on your commercial plumbing to function properly. There are too many things could go wrong if you chose a plumber who cannot deliver the high quality and punctual service that commercial properties rely on. 

Contact Our Reliable Team Today

Save yourself time, stress and money by keeping these things in mind when searching for your next commercial plumber. If you’re in need of a commercial plumber in Connecticut, contact us today for 10% off your first service! You can count on our experienced team of experts to deliver trustworthy and dependable service. We are here for you 24 hours a day, 7 days a week. 

/by

Commercial Plumbing Tips for Reopening Your Business

Commercial plumbing

Are you one of the thousands of businesses that shut down their physical location because of the COVID-19 pandemic? If so, we know that opening back up is essential but will take time and careful planning. The commercial plumber at Moonlight Plumbing wants to share a few things to look out for if your business has been stagnant for a while. These precautions will help keep your customers and employees safe when you reopen in this new normal. 

Commercial Plumbing Tips

Flush Out Standing Water

This tip is especially important for business where employees and customers use and consume water. As water rests inside pipes and appliances, it loses chlorination allowing harmful organisms to grow such as tuberculous mycobacteria and Legionella. These bacteria are harmful to the pipes, make water non consumable and should not be used for cleaning or cooking. We recommend both cold and hot water lines be flushed before you reopen to make sure only fresh, potable water is running through the pipes. We aren’t just talking about sinks. You need to think about showers, hot tubs, decorative fountains, cooling towers and any other water fixtures inside your business. 

Water Heater Inspection

Water heater temperatures need to be at 140° F to kill pathogens. They also need a mixing valve to bring the temperature down to 120° F. As water flows through the sink, tub faucets and shower heads, the mixing value ensures the water does not scold you. If the water heater has not been operational for some time, you may want to call an experienced commercial plumber to inspect the fixture to ensure it functions properly for everyone’s safety. 

Test Your Toilets

Even though you don’t consume, cook or clean with toilet water, you should not overlook the operation of your toilet before you reopen your business. One way to make sure your toilets are functioning is to check if they are flushing properly and not leaking. To test this, drop some food coloring into the toilet tank. Wait 15 minutes and check the toilet bowl for any color. If you don’t see any color, it’s a sign you may have a leak and will want to call a commercial plumber before opening. 

  • commercial plumber expert
  • commercial plumbing reopen
  • commercial contracting

Call A Commercial Plumber Before You Reopen

You can read more from the CDC about what steps you should take to reopen your business on their site. In the meantime, we, Moonlight Plumbing of Stonington and Mystic, CT, are here to help you reopen your business as quickly and safely as possible without any plumbing issues. Our commercial plumbing services can handle all of your plumbing needs big or small. Check out our services and contact us today for 10% off your first service. Let us help get you back to business!

/by

Unclog Your Toilet Without a Plunger: Bathroom Plumber Weighs In

commercial plumber

For your safety and the safety of your home, our bathroom plumber typically recommends leaving the plumbing to the plumbers. However, a clogged toilet is a frustrating plumbing issue that you may be able to solve on your own, without a plunger. 

For many, plungers are a side-of-the-toilet bathroom staple and the easy go-to for an unforgiving clog. However, plungers are oftentimes used with excessive force creating an even bigger mess. When used improperly, a plunger may break the seal between the floor and the toilet or even crack the bowl.

Check out these 5 home remedies to clear a clogged toilet without a plumber.

*A friendly reminder from your neighborhood bathroom plumber, always wear protective gloves when working with your plumbing.

bathroom plumber moonlight plumbing
moonlight plumbing bathroom plumber

Hot Water

An easy, yet effective, declogging method is to pour hot water into the toilet bowl. The hot water may loosen the clog just enough to get things moving. When trying this method, make sure your water is hot, not boiling. Boiling water may crack your toilet creating a much larger problem. 

Dish Soap

Hot water not doing the trick? Trying adding one cup of dish soap into the bowl. You’ll want to let the mixture sit for 30 minutes before flushing. If you have the time, consider letting the soap and water sit overnight. If you are all out of dish soap, shampoo could be used in its place.

Drain Clearing Chemicals

Although using chemicals is not an eco-friendly method, they do work. Follow the instructions closely on a product such as Drano. If you are dealing with a particularly pesky clog, do not use drain chemicals over and over again. They can cause the pipes to burn with overuse.

Drain Snake

Invest in a drain snake. On this particular one, a vinyl guard protects the porcelain at the throat of the toilet bowl. Follow the instructions closely for maximum effectiveness. Some people are tempted to unravel a wire hanger as a homemade drain snake. If the clog is very deep, this method will not work because the wire will not bend. Also, if used without care, the wire could damage the throat of the toilet.   

Baking Soda and Vinegar:

This classic cleaning mixture can also be used to clear a toilet. To use this method, you’ll need the toilet bowl about half way full of water. Add one cup of baking soda into the water, mix it around and let it sink. Next, add two cups of vinegar in a circular motion into the toilet and let it fizz. Wait about 30 minutes and try to flush. If it does not work the first time, add the same mixture into the toilet and let it sit overnight.

moonlight plumbing bathroom toilet

Even with top of the line plumbing, clogs will happen. Fortunately, there are a few plunger alternatives that are known to get rid of the grease and grime jamming up your toilet. If these tips and tricks don’t work, it may be time to call a local bathroom plumber. If you are located in the Mystic or Stonington, CT area, contact us for a free quote!

/by

Faucet Trends From a Commercial Plumber

faucet bathroom sink commercial plumber

If you own, manage, or are developing a commercial building, you’ve got plumbing on your mind. When it comes to commercial plumbing, the current trends are quality and convenience. Our commercial plumber recommends finding the balance between functionality and eco-friendly with your appliances and fixtures to best serve your customers or employees.    

Today, let’s talk about faucet trends.

  • commercial plumbing
  • water heater plumber

Commercial Plumbing Faucet Trends

High Efficiency

We’ve all been told to turn the faucet off when we’re brushing our teeth. But what about saving water when we turn the faucet on? With water efficient faucets on the market, it may be time to consider a WaterSensed labeled faucet. These faucets, good for commercial or residential sinks, can reduce water flow by 30%. This low-flow fixture still offers 1.5 gallons of water per minute, and will help your business be more environmentally friendly.

Antimicrobial

When you are in high traffic facilities, you are more susceptible to germs. For example, hospitals, doctors offices and senior living facilities, are places that should highly consider these faucets. The inside of these fixtures are coated with an antimicrobial that inhibits the growth of bacteria. Touched by multiple people a day, these faucets can reduce the spread of infection. In today’s climate, these quality faucets have never been more important.

Motion Activated

These faucets are both functional and eco-friendly. With these faucets, you don’t have to touch a surface hundreds or thousands of people are touching daily. Water is only flowing when your hands are directly below the faucet. It’s a win-win for commercial plumbing, and although they’ve been around for a while, we’re seeing more and more buildings installing these highly efficient fixtures.

  • commercial plumbing
  • commercial plumbing contact us

Contact A Commercial Plumber

When it comes to commercial plumbing fixtures, you have options but you won’t go wrong following these trends. If you have questions, are considering an upgrade or need to replace your commercial appliances or fixtures, contact us today!

/by

New Construction Plumbing for Those Who Build From the Ground Up

plumbing pipes new home construction

When building a house or commercial building “from scratch”, there’s a lot of moving parts. There are things and people to manage, numerous decisions to make, a budget to keep in mind, and a whole lot more. Honestly, it can be quite overwhelming. But, the plumbing aspect doesn’t have to be a headache. If you choose a professional plumber, he/she/they should have a thorough understanding of the complexity and amount of work that all new construction plumbing entails.

When you buy an older house/property instead of building, you often run into the issue of outdated and/or unmaintained plumbing. While it may feel like a burden upfront for all new plumbing appliances, the longevity and opportunity to properly care for new appliances can save significant amounts of money in the long run. Also, there are constant updates and improvements needed on plumbing appliances to help them run more efficiently. Installing these more efficient appliances upfront will help you save money on the utility bill each month.

We, at Moonlight Plumbing, understand you have a lot to worry about and we are prepared to help give you comfort knowing your new construction plumbing work is in good hands. Here are two new construction plumbing tips for your property.

new home construction plumbing

New Construction Plumbing Tips

  1. Understand Basic Plumbing Systems/Processes
    • Septic Tank/Sewer
      • You need to know what size of septic tank you need (dependent on the square footage and # of rooms in the house).
      • Septic tanks separate solid and liquid waste. The breakdown is completed by microorganisms and it outputs gas that needs to be vented properly.
    • Piping
      • Clean water flows through pipes at 50-60 psi from a supply line. Gravity pulls down the heavier, dirty water that will then exit the pipe system. Air also blows through the vents to help keep pipes clean and flowing smoothly.
    • Plumbing Appliances/Hardware
      • We all are familiar with plumbing hardware like tubs, sinks, showers, toilets, etc. It’s important to know that these appliances are easier to install if the walls and doorways haven’t been built out. Forgetting to do this prior to building will cause quite a headache and a lot of backtracking as far as building goes. If you’re worried about the cleanliness of the appliances, cover them with plastic or cardboard to help keep clean during construction.
  2. Important Plumbing Decisions to Keep in Mind When Building
    • Where will the main stack be located?
      • Generally, 3-4 inches in diameter and runs from the basement to the roof. Needs to be able to run without interruptions.
    • Install Drains and Vents
      • Bends in pipes need to be smooth when connecting to the main stack, pipes need to slant at a ¼” per foot to keep drain running properly, and venting needs to be set up properly so water and air can run through accordingly.
    • Be sure before any plumbing is installed you get a building permit to install your plumbing (this includes a plumbing diagram to be drawn up for approval).

Do you need a new construction plumber? 

With new construction plumbing projects, it’s important to find and hire a reputable plumbing contractor you can trust. Moonlight Plumbing has a team of experienced plumbers who have a diverse and expert understanding of new construction plumbing. We understand there’s always a budget to stick to and deadlines to meet whether building a residential or commercial building, and we are prepared to meet these expectations. We hope you choose one of our professionals to help with your next project! In the meantime, we are prepared to answer any questions you may have. Call one of our team members any time. If you are ready to receive a quote contact us today!

/by

Water Heater Plumber Provides Insight On Hot Water Heater Temperature Setting

water heater plumber

Nearly 20% of your energy bill is calculated from your water heater. Our water heater plumber says that setting your water heater temperature too high/too low can do more harm than good. For example, if your water heater temperature is too high, you’re paying for that extra cost. On the contrary, if your water heater is too low you may experience an inconvenience with lack of hot water. Also, with lower water temperatures, you’re at greater risk for growing bacteria in your tank.

The EPA recommends a temperature of 120˚F for a water heater. It typically avoids insufficient hot water supply, is energy-efficient for billing purposes, and is a comfortable temperature for family members of all ages. But, there are a few reasons why you may want to set your heater above or below the recommended amount.

Reasons For Straying From the Recommended Temperature Setting

  • If you have a dishwasher that doesn’t preheat water, you may want to set the water heater to 140˚F.
  • If children or Elderly are in the facility, you may want to keep it lower due to burning concerns.
  • Individuals with suppressed immune systems or respiratory disease should keep the hot water at 140˚F.
  • Individuals living alone may want to keep it lower to try to save money since demand for water is less.
  • In general, every 10˚F you turn it down, you can save an average of 3-5% on your energy bill.
  • water-heater-plumber
  • water heater plumber
  • water heater plumber

Other Notes About Water Temperature Setting

  • Need to know what your current water temperature setting is set to? It can be found by looking at the dial on the water heater. Or, if you don’t have a dial, you can take a temperature reading from any faucet. If you do a measurement from the faucet, be sure to let the water run for a few minutes to get the most accurate reading.
  • If you’re unsure on the temperature your water heater should be set, start at 120˚F change by intervals of 5-10˚F. You know you found the perfect temperature when…
    • You get enough hot water to shower, wash dishes, do laundry, etc without running out.
    • Children or other family members are not at risk of injury/burns.
    • It’s comfortable to cleanse with but is still at a respectable temperature to be wary of the energy bill.
  • If you decide you need to lower your water heater temperature, but are worried about bacteria growth, you could install a hot water tank booster. This will store the water at 140˚F, but will mix with cooler water before reaching the faucet. Thus, you get water about 120˚F by the time it is pouring into your hands and you can rest assured that bacteria isn’t infecting your water heater.

Water Heater Plumber Near You

Find a water heater plumber near you. In our previous blog we shared the different types of water heaters we offer at Moonlight Plumbing. Talk with one of our professionals today to see which water heater is best suited for your home/facility. Also discuss what temperature to which your water heater should be set. Anyway we can help, we’re here for you!

/by

Connecticut Plumber Suggests Getting Away From Fossil Fuels and Into Renewable Energy

Many of us see eliminating oil heat from our house as a daunting task. A lot of us see the larger upfront cost and don’t really understand the benefits of paying for this upgrade. You’re not alone thinking the costs won’t outweigh the benefits. But, our Connecticut plumber wants to help clarify why you should be weary of using oil to heat your water/home and look into investing in a more renewable energy source. And, when/if you’re ready to make the switch we know just who to call!

Connecticut Plumber Shares the Oil Facts

If our planet doesn’t reduce its carbon footprint by 50% in the next two decades, we’ll all experience serious consequences. This means many of us need to stop using oil in our homes. Oil is used for three main reasons in our home: to heat water, living space, or the chimney. One of the biggest issues with using oil to heat your home is the “standby” losses that occur with your boiler. Typically, about a quarter of your heat is wasted by escaping through your chimney or into your basement!

There are countless other downfalls of using oil as your main heat source. Here are just a few of the “big factors” we’d like to share. Typically, oil has higher fuel cost because \ heating oil is more expensive than heating natural gas. Also, oil requires a lot of maintenance. Dirt and soot often get mixed in the oil and build up causing issues. So, more times than one would like, there are repair men sent to the house to help clean out the build up. Finally, in general, oil heat is just inconvenient. It doesn’t have the pipeline infrastructure so you have to store the oil in a tank and refill regularly.

Solutions We Offer at Moonlight Plumbing

If you’re looking to replace/upgrade your system, we have a couple options at Moonlight Plumbing that may suit your needs.

  • Option #1: Tankless Water Heaters
    • Saves Money – it prevents the system from heating water that won’t be used.
    • Efficient – It only uses energy to heat the water on an as-needed basis.
    • Longevity – You’ll be less likely to replace your water heater.
    • No Limit to Hot Water – It heats water on demand so there’s never a chance of running out.
  • Option #2: Conventional Water Heaters
    • There are two subcategories when selecting this option; natural gas or electric.
    • Option A – Natural Gas Heaters:
      • Cheaper Than Oil – there’s more stable supply and demand for gas making it cheaper than oil.
      • Requires Little Maintenance – gas burns cleaner than oil resulting in less build up of dirt or other particles. Therefore, less repairs/cleaning necessary.
      • Gas is Nontoxic – it won’t contaminate soil or groundwater if it leaks.
    • Option B – Electric Heaters:
      • Safe and Reliable – most have no moving parts which means there’s less chance of breaking down. Thus, resulting in longer life span as well.
      • Affordable and Efficient – it’s the cheapest option of heating a home because of stable supply and demand for a long period of time now.
        • They can also be wired room to room so if a room is not in use, you won’t need to heat it saving you money
      • Environmentally Friendly – doesn’t require the burning of anything so it will not emit pollutants into the atmosphere. It also eliminates the risk of gas leaks.
  • connecticut plumber
  • connecticut plumber

Let Us Help You Find a Better Solution

While there is no right or wrong way to heat your house, our Connecticut plumber believes there is a worse and better solution. Finding the right solution to heat your home so it’s affordable, reliable, and efficient is important. If you’re ready to help stop pollution, save money in the long term, and upgrade your home by switching your oil heater to natural gas or electric, call one of our experts today. Or, if you have questions or need more information reach out on our website, too! We look forward to helping you find a better way to heat your home.

/by

Tips for Finding the Right Plumber

plumber

It’s inevitable that a majority of us will need to call a plumber at some point in our lives. Whether your plumbing breaks because of an accident, the daily wear and tear, or one of the many other reasons it’s bound to happen. And, whatever the reason, you’ll most likely be calling an expert for help. But, how do you know if you’re choosing a reliable plumber? How do you know if the pricing is fair? Many of us have never done this before, what makes a plumber a good plumber? These are all important and great questions to have answers to before making that initial call. We’re here to provide some answers and helpful tips on how to choose the right plumber for the job.

Our Plumber Suggests to Check These Things

  • Check Qualifications

    • You want to ensure they have a license. Licenses are a REQUIREMENT for all practicing plumbers.
    • Also ensure they have insurance in case of disasters. You don’t want them to get hurt in your home and try to hold you responsible.
    • Before scheduling a visit, ask if they do background checks on employees. After all, the plumber will be entering your home, place of business, etc. and you shouldn’t have to worry about the broken plumbing and the plumber fixing it.

  • How Professional Are They?

    • Yes, they are just “plumbers” but plumbers represent a business. Don’t work with a plumber who doesn’t treat you with kindness and respect!
    • Ensure they are dressed appropriately for the job. Showing up in sweatpants and a ripped up t-shirt isn’t what we call “professional”.
    • Don’t forget, professionalism also includes scheduling and invoicing. Arriving to appointments, scheduled phone calls, etc. should be on time and well organized in general.

  • Are they prepared for emergencies?

    • A professional plumber should never put you off, tell you to wait, or act like your emergency is unimportant. He/she should also not panic and should help you feel more at ease about the situation after just a short phone call.
    • They should have 24/7 availability for all urgent needs. A good plumber knows that you don’t ask for your kitchen to flood at a certain time, but you need it to be stopped ASAP!
    • And, last but not least, they should obviously have the appropriate equipment to handle the urgent situation.
  • plumber
  • plumber
  • plumber

  • Pricing

    • A plumber has expertise in his/her field so prices can be higher than some expect. But, ensure they are not too high to a point where they are likely taking advantage of the situation. Also, take caution of plumbers who seem “cheap”. There could be a reason for this. For example, using low quality products for the repair or they may be inexperienced. Just be aware when getting estimates.
    • Also, be weary of plumbers who provide an estimate over the phone without ever seeing the situation in person. How do they know how much it costs if they haven’t seen what they’re fixing? We don’t know how they do it!
    • While it is expected that initial estimates will not match the total to the penny, they should be close. An experienced plumber understands we all have a budget and saying one price and charging another isn’t right or fair. But, also understand things may come about during the repair. A professional will discuss any options with you prior to acting on them if they suspect additional charges.

  • Look at Reviews

    • A reliable, trustworthy plumber won’t, and doesn’t need to, hide their customer’s feedback. While no ones perfect, an average of ratings can give a good impression of the type of service you will receive.
    • At the end of the day, the work speaks for itself. Trust the reviews! See what customers have to say about us on Google, HomeAdvisor, or on our website.

  • Find a Local Plumber

    • Typically, plumbing issues are an urgent matter so finding someone who can come ASAP is important. If you hire a non-local it could take quite some travel time, fitting in their schedule can be more difficult, and overall is typically a longer process from start to finish.
    • Also, if there are further pressing issues, you want to be able to call the plumber familiar with the situation to take another look. It’s definitely more difficult to get the exact same plumber out to your house when the business is a large corporation.
    • This may be stereotypical, but typically local plumbers have more respect for the town and the people in it. Also, unlike the big corporate plumbers, local plumbers are less focused on the money and more concerned with the service. All in all, TRUST LOCAL!
    • Moonlight is the number one local plumber in Mystic, CT. But, don’t take our word for it. We let our work speak for itself and let our customers speak for the work. Read the reviews above to find out why we are the number one local plumber in Mystic.

See If We’re a Good Fit

Take this information and use it to choose the right plumber for the job. At the end of the day, you want a plumber who can fix the issue(s), but you also want to be treated with respect and feel assured your plumbing is in good hands. Talk to one of our plumbers today to see if we’re a good fit to help you!

/by

Commercial Contracting Tip: What You Need to Know About Sewer Inspections, Repairs, and Maintenance

commercial contracting

If you go back to your grandparents era, you would see that sewer repairs were quite a headache. Thanks to ever-advancing technology, these repairs and inspections have become much easier to execute today. But, sewer repairs/maintenance can quickly become costly or cause much bigger issues with your piping. Especially, if you own a commercial property space. Understanding how to properly maintain your underground sewer for your commercial contracting properties can help to avoid costly repairs. We’re here to give you the inside scoop on sewer inspections, repairs, and maintenance so you know what to expect and how to properly care for your commercial property’s underground sewer.

Commercial Contracting – How We Complete Sewer Repairs

  • Just a few, short years ago we would have to do extravagant work if a sewer needed repairs. Typically, involving huge excavations, a dug up yard or street, and a mess overall.
  • Professionals often suggest a common repair called “pipe relining”. This process involves a high pressure hydro jet to help clean out a pipe. Then, he/she will insert the new pipe to line up against the old one in hopes that it hardens. This will prevent leakage in the pipes and help keep trees from rooting into them.
  • Another common repair is called a Resin injection. An expert will often do this when there are a few minor cracks in the piping. Professionals will dig to reveal the cracked pipe and proceed to fill cracks with resin which will eventually harden sealing the cracks.
  • Often, though, these repairs can get expensive fast at commercial properties. So, to avoid having to do repairs on your sewer, always do inspections and regular maintenance to your pipes.

How We Do Sewer Inspections

  • Your first sewer inspection should take place before buying a commercial property. This way you can avoid buying a property with sewer problems – what a headache!
  • Inspections are done by professionals with the proper knowledge and equipment to get a proper evaluation.
  • The expert will do the sewer inspection using a camera. The camera goes down into the piping and can help us see, at the surface, if there are clogs, cracks, root intrusions, or other areas of concern.

Commercial Contracting: Maintenance Tips and Tricks to Avoid Costly Repairs

  • Plant trees away from sewer lines on your commercial property (this will potentially avoid roots getting into the sewer pipes in later years).
  • Keep trees watered during drought. One reason roots get so long is because they are searching for water. Longer roots means greater chance of interference with pipes.
  • Know signs of sewer backup.
    • If multiple drains become slow on the commercial property at once, you have an issue!
    • Or, if water is running from one fixture to the next (instead of flushing down the drain).
    • Also, there’s likely a backup if you hear gurgling noises when water is flushed down pipes.
  • Always avoid putting any items down the drain that are not meant to be in pipes (hair, grease, etc) to help prevent clogging. Use proper tools to unclog drains from the store or contact a professional for extensive clogs.
commercial contracting

Need Sewer Help?

It’s important to keep up with sewer inspections and do routine maintenance, especially in commercial space, to avoid costly repairs. Understanding how sewers work, how to maintain them, and how to avoid repairs in general will help save you money and a headache. We hope the provided information is helpful from our commercial contracting team. If you, or someone you know, is experiencing sewage issues, contact our professionals today for expert help and guidance.

/by